====== Connect your SIP Clients to OXE ======
  * FIXME Virtual lab dashboard, connection information (FQDN, Authorization name, Password, Domain)

===== Account configuration =====
Following the information you were given, enter the following information in your SIP Client:
  * User ID (extension)
  * Domain (FQDN from your OXE virtual lab)
  * Password
  * Authorization name (same as your extension)
  * Transport **UDP** and port **6260** (the routing is done via a SBC)
{{ :vlab:sipclient:oxe_sip_account_management.jpg?nolink |}}
At this point, you should be able to login and dial a test number like *0# (it will list all the tones of the OXE, starting with a RING).
\\ \\ 
:!:***IMPORTANT NOTE***: Make sure you are using G711-MuLaw CODEC.

===== Optional voicemail =====
{{ :vlab:sipclient:sip_voicemail.png?nolink |}}

\\ \\ \\ 
===== Make your first test call =====
  * Call ***0#** - This will play all tones feedback (starting with the RING one)
  * If you did setup 2 extensions, you can either call the direct 4 digits number, or dial **91xxxyyyzzzz** (9 is the prefix, 1 is mandatory for the dialing plan, xxx and yyy are random numbers, zzzz is the extension you want to receive the call to).


This last example will simulate a phone call going out, then back in to the system, through a SIP Carrier emulator.